Engines / UDS Engines by part number / 01 - Engine [EV_ECM20TDI01104L906016JF 004005] / Test - Dosing of the reducing agent SCR AdBlue

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Part 1 of the order number Select the first three characters of the order number of the engine control unit. This number can be found in the VCDS when linked to the uniform in the SW order number field. Do not insert the ordering number from the control unit packaging here!!!

Select the first three characters of the order number of the engine control unit. This number can be found in the VCDS when linked to the uniform in the SW order number field. Do not insert the ordering number from the control unit packaging here!!!

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 1x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
- engine speed = X rpm
- parking brake = ON
- automatic transmission = N or P

Note:
- The control unit shall increase and reduce the pressure of the reducing agent. Visually check the system for leaks
- duration - XXMIN

connect with the control unit XX - engine

XX - Security access

enter value: XXXXX

Start

XX - Adaptation

select item in menu: IDEXXXXX - adaptation - Quantity measuring unit

TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

new value -> enter value: XX

Start

XX - Basic settings

select item in menu: IDEXXXXX - Test - Quantity measuring unit SCR

Start

Note:
The control unit shall increase and reduce the pressure of the reducing agent. Visually check the system for leaks

In the Basic Settings window, click Measured values and select the items you want to visualize.

select item in menu:

IDEXXXXX- Reducing agent - Pressure: calculated value

TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

desired condition

IDEXXXXX- Reducing agent - Pressure: calculated value

required values:
X.X - X.X bar

if values are not achieved, check part:
- Reducing agent - wiring (tightness? clogged?)
- additive pump
- check of error memory

back

XX - Basic settings - Stop

end

Log-in Buy