Engines / UDS Engines by part number / 01 - Engine [EV_ECM20TDI01104L906026QQ 004006] / Adaptation - pressure difference sensor - exhaust recirculation

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Part 1 of the order number Select the first three characters of the order number of the engine control unit. This number can be found in the VCDS when linked to the uniform in the SW order number field. Do not insert the ordering number from the control unit packaging here!!!

Select the first three characters of the order number of the engine control unit. This number can be found in the VCDS when linked to the uniform in the SW order number field. Do not insert the ordering number from the control unit packaging here!!!

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Could not find the operation for the given language. We are showing the operation for the English language.

Poznámka:
• teplota motoru > XX°C
• otáčky motoru = X ot/min

spojit se s řídící jednotkou XX - motor

XX - Bezpečnostní přístup

vložit hodnotu: XXXXX - zpřístupnění funkce: přizpůsobení

alternativně použijte:

SXXXXX - zpřístupnění funkce: přizpůsobení (vývojový testovací režim)

i mezi jednotlivými pokusy vypnout zapalování - XXs

Start

XX - Základní nastavení

v rozbalovacím menu vyberte položku: IDEXXXXX - přizpůsobení - snímač rozdílu tlaků - zpětné vedení výfukových plynů

Start

požadovaný stav: úspěšně dokončeno

XX - ukončení komunikace

konec testu

This procedure was generated by robot VISHunter XXXXXX X.X.XXXX at XX:XX:XX on ACS-NTB

Log-in Buy