Engines / UDS Engines by part number / 01 - Engine [EV_ECM14TFS01104E906014AC 001008] / Unlocking the high-voltage system after a crash

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Part 1 of the order number Select the first three characters of the order number of the engine control unit. This number can be found in the VCDS when linked to the uniform in the SW order number field. Do not insert the ordering number from the control unit packaging here!!!

Select the first three characters of the order number of the engine control unit. This number can be found in the VCDS when linked to the uniform in the SW order number field. Do not insert the ordering number from the control unit packaging here!!!

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Could not find the operation for the given language. We are showing the operation for the English language.

Podmínky:
•         Tento postup mùže vyžadovat otevøenou kapotu, pøípadnì odemknutí ochrany SFD
•         Tento postup mùže vyžadovat doèasnou deaktivaci diagnostického filtru Gateway

Toto je postup odblokování po nárazu pro øídící jednotku: XX - motor

Postup odblokování po nárazu je nutno provést v tomto poøadí v tìchto øídících jednotkách:

•         XX - motor
•         XX - Elektrický pohon
•         XXXX - DC Convertor
•         XC - HV Baterie
•         CX - Nabíjeè baterie
•         XX - gateway

Pro jednotlivé postupy jdìte do pøíslušných øídících jednotek ve VIS

Na opravách vozidel s vysokonapovým systémem smí pracovat pouze osoby s pøíslušnou kvalifikací! Autor tohoto postupu výslovnì zakazuje používat tyto informace a provádìt tento postup, pokud nemáte pøíslušnou kvalifikaci!!!

Spojit se s øídící jednotkou XX - motor

Odemknìte SFD

XX - Základní nastavení UDS
vyberte položku v menu:
IDEXXXXX - vysokonapový systém - data nárazu: odblokování
Start
požadovaný stav: úspìšnì dokonèeno

smazat pam závad

pokračovat: XX - Elektrický pohon

Created on: X.X.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft s.r.o. All rights reserved.
Special thanks to Josef Haptman

Log-in Buy