Engines / UDS Engines by part number / 01 - Engine [EV_ECM12TDI03103P906021B 001045] / Test of exhaust gases temperature sensor 1;3;4 (G235; G495;G648)

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Part 1 of the order number Select the first three characters of the order number of the engine control unit. This number can be found in the VCDS when linked to the uniform in the SW order number field. Do not insert the ordering number from the control unit packaging here!!!

Select the first three characters of the order number of the engine control unit. This number can be found in the VCDS when linked to the uniform in the SW order number field. Do not insert the ordering number from the control unit packaging here!!!

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
- engine temperature = ambient temperature

connect with the control unit XX - engine

Start the engine

engine speed = idling

wait XXs

Advanced Measured Values

select item in menu:

IDEXXXXX - Exhaust gas temperature sensor X (temperature upstream of component: turbo blower)
IDEXXXXX - Exhaust gas temperature sensor X (temperature upstream of component: Diesel Particulate Filter)
IDEXXXXX - Exhaust gas temperature sensor X (temperature downstream of component: Diesel Particulate Filter)

TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

increase rpm to XXXX rpm

desired condition:

Exhaust gas temperature sensor X = increasing - strongly
Exhaust gas temperature sensor X, X = increasing - moderately

temperature of exhaust gases X > temperature of exhaust gases X > temperature of exhaust gases X

for this test, it is suitable to use graphical representation VagScope

Picture documentation:

+ G235-def.JPG

+ G235 - OK.JPG

if values are not achieved - check component:
- temperature sensor
- wiring: temperature sensor -> control unit
- connector connections

Log-in Buy