Engines / UDS Engines by part number / 01 - Engine [EV_ECM20TDI01105L906022P 007010] / Temperature sensors test
Mark | Model | Control unit | Diagnostic operation |
---|
Mark

Model

Part 1 of the order number 

Control unit 

Diagnostic operation 

Diagnostic procedure
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Conditions:
engine temperature = ambient temperature
connect with the control unit XX - engine
engine temperature = ambient temperature
Advanced Measured Values
select item in menu:
IDEXXXXX - intake air temperature
IDEXXXXX - cooling temperature sensor X: raw value
IDEXXXXX - turbo blower X: temperature sensor X: raw value
IDEXXXXX - intercooler: radiator outlet: temperature sensor X: raw value
IDEXXXXX - Ambient temperature indicator: temperature sensor X: raw value
IDEXXXXX - Ambient temperature indicator: temperature sensor
IDEXXXXX - coolant temperature
TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window
desired condition
IDEXXXXX = IDEXXXXX = IDEXXXXX = IDEXXXXX = IDEXXXXX = IDEXXXXX = IDEXXXXX
=
actual value
± X°C
TIP! for this test, it is suitable to use graphical representation
Picture documentation:
TIP! Move the line and connector connection on the sensor and observe whether the values do not change sharply
if values are not achieved - check component:
- temperature sensor
- wiring
- connector connections
engine temperature = ambient temperature
connect with the control unit XX - engine
Advanced Measured Values
select item in menu:
IDEXXXXX - intake air temperature
IDEXXXXX - cooling temperature sensor X: raw value
IDEXXXXX - turbo blower X: temperature sensor X: raw value
IDEXXXXX - intercooler: radiator outlet: temperature sensor X: raw value
IDEXXXXX - Ambient temperature indicator: temperature sensor X: raw value
IDEXXXXX - Ambient temperature indicator: temperature sensor
IDEXXXXX - coolant temperature
TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window
=
actual value
TIP! for this test, it is suitable to use graphical representation
Picture documentation:
TIP! Move the line and connector connection on the sensor and observe whether the values do not change sharply
if values are not achieved - check component:
- temperature sensor
- wiring
- connector connections
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.