Gearboxes / 6-speed / 6-speed automatic transmission (09G / 09M) / Test - oil volume in gearbox

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 1x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
- gear lever = P
- the vehicle must be standing on a level surface
- gear oil temperature XX - XX °C
- activate the hand brake

Start the engine

depress and hold brake pedal

connect with the control unit XX - gearbox electronics

XX - Measured values group XXX

gradually engage each gear for Xs and P at the end

required values
field X = XX - XX °C (gear oil temperature)

check the level in the usual way using the control bolt in the gearbox housing

Log-in Buy