Immobilizers / 25 - 17 - Immobilizers / Generations I and II / adaptation of keys

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
- it is necessary to adapt all keys (even why they are already functional)
- appliances OFF

XX - Login
enter value: Vehicle PIN

XX - Adaptation channel XX
enter value: number of keys
Save

Note:
key in ignition adapted

now, within a period of XXs, gradually switch the ignition on using all the keys to be adapted

Note:
upon entering the incorrect Login code three times, immobiliser blocks
a further attempt is possible after XX minutes of ignition on time and completed communication

Created on: XX.XX.XXXX XX:XX:XX Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved. (Karolina)

Log-in Buy