Diagnostic procedures for a VAG diagnostics
Database for coding vehicle control units Volkswagen - VAG
Software versions
VIN - Code validator- Scan Explorer
MAN / MAN TGE (UY) / A5 - Front Drive asssist sensor [EV_MFKBoschMQBB 002041] / Lane assist - button - settings
Search:
Search area:
| Mark | Model | Control unit | Diagnostic operation |
|---|
Mark 
Model
Control unit
Diagnostic operation
Diagnostic procedure
This operation was considered useful 1x.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Note:
- the feasibility of this test may depend on the equipment of the control unit!
- The control unit may require Login function for successfull coding For correct Login code go to Security access section of this unit.
connect with the control unit: AX - Front Sensor Driver
coding
Coding calculator
Byte XX (the first byte in the sequence is counted as the zero byte)
bit X-X (the first bit in order is counted as the seventh, then down to zero)
TIP: In the coding calculator, use the drop-down menu or checkboxes to make your selection.
Manual Byte assembly in the coding calculator:
enter value (BIN):
xxxxxXxx = lane assist - after engine Start = OFF
xxxxxXxx = lane assist - after engine Start = ON
xxxxXxxx = lane assist - after engine Start = last setting (memory)
Picture documentation:
After assembling the byte, press ENTER on the keyboard
Start
End of test
This procedure was generated by robot VISHunter XXXXXX X.X.XXXX at XX:XX:XX on ACS-NTB
- the feasibility of this test may depend on the equipment of the control unit!
- The control unit may require Login function for successfull coding For correct Login code go to Security access section of this unit.
connect with the control unit: AX - Front Sensor Driver
coding
Coding calculator
Byte XX (the first byte in the sequence is counted as the zero byte)
bit X-X (the first bit in order is counted as the seventh, then down to zero)
TIP: In the coding calculator, use the drop-down menu or checkboxes to make your selection.
Manual Byte assembly in the coding calculator:
enter value (BIN):
xxxxxXxx = lane assist - after engine Start = OFF
xxxxxXxx = lane assist - after engine Start = ON
xxxxXxxx = lane assist - after engine Start = last setting (memory)
Picture documentation:
After assembling the byte, press ENTER on the keyboard
Start
End of test
This procedure was generated by robot VISHunter XXXXXX X.X.XXXX at XX:XX:XX on ACS-NTB
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
