Diagnostic procedures for a VAG diagnostics
Database for coding vehicle control units Volkswagen - VAG
Software versions
VIN - Code validator
Seat / Alhambra (7M) / OTHER PROCEDURES / Adaptation of remote control devices
Search:
Search area:
| Mark | Model | Control unit | Diagnostic operation |
|---|
Mark 
Model
Control unit
Diagnostic operation
Diagnostic procedure
This operation was considered useful 2x.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Conditions:
- windows = closed
- the adaptation of each ignition key must not take more than XX seconds
X)
insert the key into the door lock and turn it three times forward (unlock direction). For X seconds, you must hold the key each time for X second in the unlock direction
X)
remove the key from the lock, press the lock button on the key and hold
X)
press the unlock button three times and then release the lock button
for control of this procedure the LED diode in the key blinks five times. The indicator light in the door trim by blinking five times announces the identification of the initial code of the control unit
Note:
- the adaptation of additional keys must be done at the latest within XX seconds after Start of the blinking of the warning indicator light in the door, repeat points X and X
Created on: X.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.
- windows = closed
- the adaptation of each ignition key must not take more than XX seconds
X)
insert the key into the door lock and turn it three times forward (unlock direction). For X seconds, you must hold the key each time for X second in the unlock direction
X)
remove the key from the lock, press the lock button on the key and hold
X)
press the unlock button three times and then release the lock button
for control of this procedure the LED diode in the key blinks five times. The indicator light in the door trim by blinking five times announces the identification of the initial code of the control unit
Note:
- the adaptation of additional keys must be done at the latest within XX seconds after Start of the blinking of the warning indicator light in the door, repeat points X and X
Created on: X.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.