Diagnostic procedures for a VAG diagnostics
Database for coding vehicle control units Volkswagen - VAG
Software versions
VIN - Code validator
Seat / Exeo (3R) / 03 - Brake electronics Bosch 8.0 / basic settings
Search:
Search area:
| Mark | Model | Control unit | Diagnostic operation |
|---|
Mark 
Model
Control unit
Diagnostic operation
Diagnostic procedure
This operation was considered useful 1x.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
steering wheel turn angle sensor (GXX)
connect with the control unit XX - Brake electronics
XX - Measured values group XXX
observe values: field X (steering wheel turn angle sensor)
turn the steering wheel XX° left
turn the steering wheel - straight direction
required values:
field X = X,X° +- X°
XX - Login
enter value: XXXXX
Start
XX - Basic settings group XXX
Start
after stabilisation of values - continue
check of error memory
delete error memory
ESP unit (GXXX)
connect with the control unit XX - Brake electronics
XX - Login
enter value: XXXXX
Start
XX - Basic settings group XXX
Start
required values:
field X = OK
XX - Measured values group XXX
required values:
field X = ± X,XX m/sX
check of error memory
delete error memory
Created on: XX.XX.XXXX X:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.