Seat / Ibiza - Cordoba (6K) / OTHER PROCEDURES / Adaptation of remote control devices

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in

Note:
- the keys with transponder and floating (crypto code) carry the letter “W”
- it is necessary to adapt all keys (even why they are already functional)

X)
switch on the ignition for maximum X s

X)
remove the ignition key

X)
within XX seconds, press and hold the OPEN button and press the CLOSE button three times

X)
release the OPEN button and monitor the key indicator light, whether it blinks Xx

X)
if the control unit accepted the remote control device, complete locking and unlocking of the vehicle and all the direction indicator lights are activated

X)
within XX s, perform steps X and X for each additional key

Created on: XX.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in