Seat / Leon (1M) / 03 - brake electronics / 07 - Coding
Mark | Model | Control unit | Diagnostic operation |
---|
Mark
Model
Control unit
Diagnostic operation
Diagnostic procedure
This operation was considered useful 1x.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Warning: During communication with the electronics control unit of the brakes when the vehicle is running, the ABS, eventually, ABS/EDS/ASR/ESP functions are deactivated, (indicated by the indicator lights) up to a speed of XX km/h. After exceeding XX km/h, the control unit automatically interrupts communication and restores all functions
X X X X X
XXX- ABS, CPU XQXXXXXXX, other models
XXX- ABS, CPU XQXXXXXXX,XQXXXXXXXC, other models
XXX- ABS/ASR, CPU XQXXXXXXX, X.X/XXkW,X.X/XXkW TDi
XXX- ABS/ASR, CPU XQXXXXXXXA , XQXXXXXXXD,X.X/XXkW,X.X/XXkW TDi
XXX- ABS/ASR, CPU XQXXXXXXX , XQXXXXXXXA, X.X/XXkW, X.X/XXkW
XXX- ABS/ASR, CPU XQXXXXXXXD, X.X/XXkW, X.X/XXkW
XXX- ABS/ASR, CPU XQXXXXXXXD, X.X/XXkW
Note:
Manifest after switching off the ignition for minimum XX seconds.
Incorrect coding may endanger ABS, or EDS and ASR functions
Upon change of control unit, code the new control unit in the same manner as the initial control unit.
Created on: XX.XX.XXXX XX:XX:XX Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved. (Karolina)
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.