Diagnostic procedures for a VAG diagnostics
Database for coding vehicle control units Volkswagen - VAG
Software versions
VIN - Code validator
Seat / Leon (1P) / 17 - dashboard -> 10/08 (KOMBIINSTRUMENT VD1/VDD) CAN / dashboard - replacement
Search:
Search area:
| Mark | Model | Control unit | Diagnostic operation |
|---|
Mark 
Model
Control unit
Diagnostic operation
Diagnostic procedure
This operation was considered useful 1x.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Note:
- Read the following values from the old instrument panel and record them. Subsequently enter these values into the new instrument panel and store them. If it is not possible to read the necessary data from the old instrument panel, find them in the service booklet.
- You can print this procedure and comfortably enter the values directly into it.
connect with the control unit XX - Dashboard
XX - Coding
stored value: ___________________
XX - Adaptation channels:
XXX - ___________________ correction of the instantaneous consumption counter
XXX - ___________________ Language settings
XXX - ___________________ kilometres travelled (XX - Measured values group XXX field X)
XXX - ___________________ correction of the fuel level indicator
XXX - ___________________ oil level
XXX - ___________________ oil level/temperature sensor
XXX - ___________________ number of km since last service inspection
XXX - ___________________ number of days since last service inspection
XXX - ___________________ minimum distance to service
XXX - ___________________ maximum distance to service
XXX - ___________________ maximum time to service
XXX - ___________________ oil quality
XXX - ___________________ soot clogging
XXX - ___________________ temperature load
XXX - ___________________ minimum time to service
XXX - ___________________ basic distance for fixed interval oil change
XXX - ___________________ basic time for fixed interval oil change
- Read the following values from the old instrument panel and record them. Subsequently enter these values into the new instrument panel and store them. If it is not possible to read the necessary data from the old instrument panel, find them in the service booklet.
- You can print this procedure and comfortably enter the values directly into it.
connect with the control unit XX - Dashboard
XX - Coding
stored value: ___________________
XX - Adaptation channels:
XXX - ___________________ correction of the instantaneous consumption counter
XXX - ___________________ Language settings
XXX - ___________________ kilometres travelled (XX - Measured values group XXX field X)
XXX - ___________________ correction of the fuel level indicator
XXX - ___________________ oil level
XXX - ___________________ oil level/temperature sensor
XXX - ___________________ number of km since last service inspection
XXX - ___________________ number of days since last service inspection
XXX - ___________________ minimum distance to service
XXX - ___________________ maximum distance to service
XXX - ___________________ maximum time to service
XXX - ___________________ oil quality
XXX - ___________________ soot clogging
XXX - ___________________ temperature load
XXX - ___________________ minimum time to service
XXX - ___________________ basic distance for fixed interval oil change
XXX - ___________________ basic time for fixed interval oil change
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.