Seat / Toledo (1L) / Dashboard from 01 / 10 - Adaptation

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in

reset of service intervals

XX - Adaptation channel XX
enter value: XXXX
Test
Save

Language settings - on-board computer
(adaptation is possible depending on the equipment)

XX - Adaptation channel XX
enter value:
X- German
X- English
X- French
X- Italian
X- Spanish
X- Portuguese
X- Czech
Test
Save

kilometres travelled

XX - Adaptation channel XX
enter value: kilometres travelled
entered in tens km (for instance: XX XXXkm enter as XXXX)
Test
Save

distance from: service inspection
(done after replacement of component: Dashboard)

XX - Adaptation channel XX
enter value: distance od: service inspection
entered in hundreds (for instance: XX.XXXkm enter as XXXXX)
Test
Save

time from: service inspection
(done after replacement of component: Dashboard)

XX - Adaptation channel XX
enter value: time from: service inspection
entry possible after: X day (for instance: XXX days enter as XXXXX)
Test
Save

minimum distance for indication of INSP

XX - Adaptation channel XX
automatically adapts after coding

maximum distance for indication of INSP

XX - Adaptation channel XX
automatically adapts after coding

maximum time for indication of INSP

XX - Adaptation channel XX
automatically adapts after coding

oil quality

XX - Adaptation channel XX
automatically adapts after coding

consumed fuel counter
(done after replacement of component: Dashboard)

XX - Adaptation channel XX
enter value from initial control unit
Test
Save

smokiness
(done after replacement of component: Dashboard)

XX - Adaptation channel XX
enter value from initial control unit
Test
Save

oil quality
(done after replacement of component: Dashboard)

XX - Adaptation channel XX
enter value from initial control unit
Test
Save

Created on: XX.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in