Škoda / Fabia 4 (PJ) 2021 -> / 55 - Control of xenon headlight bevel [EV_HeadlRegulAFSMQBMAX 001001] / Operating variant - settings
Mark | Model | Control unit | Diagnostic operation |
---|
Mark
![Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.](/admin_assets/images/silk/comment.png)
Model
![Select a vehicle model or information group, for example Octavia III or Diesel, Petrol etc.](/admin_assets/images/silk/comment.png)
Control unit ![Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.](/admin_assets/images/silk/comment.png)
![Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.](/admin_assets/images/silk/comment.png)
Diagnostic operation ![Select the desired diagnostic procedure.](/admin_assets/images/silk/comment.png)
![Select the desired diagnostic procedure.](/admin_assets/images/silk/comment.png)
Diagnostic procedure
This operation was considered useful 1x.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Note:
- when driving in countries with LHD, the settings of the reflector must be changed to prevent bedazzlement of oncoming vehicles
connect with the control unit XX - Control of xenon headlight bevel
XX - Security access
enter value:
XXXXX = function accessible: Adaptation, Basic settings
(if it shall not be accepted, the unit does not require a safe approach)
Start
XX - Adaptation
select item in drop-down menu: IDEXXXXX - activation LHD / RHD
enter value:
active = LHD
inactive = RHD
Start
switch ignition off for XXs
- when driving in countries with LHD, the settings of the reflector must be changed to prevent bedazzlement of oncoming vehicles
connect with the control unit XX - Control of xenon headlight bevel
XX - Security access
enter value:
XXXXX = function accessible: Adaptation, Basic settings
(if it shall not be accepted, the unit does not require a safe approach)
Start
XX - Adaptation
select item in drop-down menu: IDEXXXXX - activation LHD / RHD
enter value:
active = LHD
inactive = RHD
Start
switch ignition off for XXs
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.