Škoda / Fabia II / Roomster II (5J) / 25 – immobiliser / Adaptation of immobiliser control unit after replacement
Search:Search area:
Mark
Model
Control unit
Diagnostic operation
Displayed 1-20 records out of 100.
<< < 1 > >>
Mark
Model
Control unit
Diagnostic operation
Diagnostic procedure
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Conditions:
- install component: XX - Immobilizer
- before this operation, take down the identification and coding of the initial control unit
- first execute the function: Adaptation of the vehicle keys
connect with the control unit XX - Immobilizer
XX - Login enter value: PIN of new immobilizer control unit (instrument panel)
for instance XXXX enter as XXXXX
Start
XX - Adaptation channel XX enter value: PIN of old immobilizer control unit (instrument panel)
for instance XXXX enter as XXXXX
Test
Save
immobiliser indicator light: off
check of error memory
Note: - If this procedure is not done properly, the immobilizer blocks for XX minutes; it is necessary to switch-off the ignition and wait.
- The newly installed and adapted control unit has adopted the VIN, SKZ and PIN and shall continue to use initial PIN of the vehicle
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Diagnostic procedures for a VAG diagnostics
Database for coding vehicle control units Volkswagen - VAG
Software versions
VIN - Code validator
Search:
Search area:
