Škoda / Fabia III (NJ) / () / Coding

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 2x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in

Conditions:
- on-board voltage MIN XXV

connect with the control unit XX – parking brake

XX - Security access

enter value: XXXXX

Start

XX - Basic settings

select item in drop-down menu: MASXXXXX - zeroing learning values

Start

wait XX s

XX - end of communication

switch-off the ignition

wait XX s

switch on the ignition

connect with the control unit XX – parking brake

XX - Security access

enter value: XXXXX

Start

XX - Coding

enter value:

order number:             coding:
XPXXXXXXXF                         XXXXXXXX
XPXXXXXXXD                         XXXXXXXX
XPXXXXXXXG                         XXXXXXXX
XPXXXXXXXC                         XXXXXXXX

Start

further, do: basic settings

Created on: XX.X.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in