Škoda / Octavia (1U) / 03 - brake electronics / Setting of coil for generation of braking pressure and switches.

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in

Conditions:
- number of faults = X

connect with the control unit XX - Brake electronics

Start the engine

XX - Login
enter value: XXXXX

XX - Basic settings group XXX
Start

system indicator light: ABS - blinks

after stabilisation of values

XX - Basic settings group XXX
Start

sharply depress - brake pedal

brake lights - on

XX - Basic settings group XXX
Start
required values:
approx XX.X bar

XX - Basic settings group XXX
Start

permit - brake pedal
required values:
approx < X.X bar

XX - Basic settings group XXX
Start

XX - end of communication

Note:
if the group is accessible: XXX Login entered incorrectly, function not supported by control unit

Created on: XX.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in