Diagnostic procedures for a VAG diagnostics
Database for coding vehicle control units Volkswagen - VAG
Software versions
VIN - Code validator
Škoda / Octavia (1U) / 15 – Airbag / Deactivation of front passenger’s Airbag
Search:
Search area:
| Mark | Model | Control unit | Diagnostic operation |
|---|
Mark 
Model
Control unit
Diagnostic operation
Diagnostic procedure
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Warning:
- exercise maximum caution for safety reason when repairing the Airbag systems
- never test the wiring harnesses with ignition on!!
- properly inform and instruct the vehicle owner about any deactivation or activation of the Airbag
- vehicles made up to Model Year XX/XXXX, it is necessary to use a set for deactivation of Airbag, Order No. XUX XXX XXX
connect with the control unit XX – Airbag
XX - Adaptation channel XX
enter value:
X = Airbag - front passenger - ON
X = Airbag - front passenger - OFF
Test
Save
check of error memory
switch ignition off for XXs
in case of deactivation disconnect the connecting block from the Airbag and lock in a suitable manner
install the set for deactivation of Airbag
XX - Adaptation channel XX
enter value:
X = Airbag - front passenger - side - ON
X = Airbag - front passenger - side - OFF
Test
Save
check of error memory
switch ignition off for XXs
in case of deactivation disconnect the connecting block from the Airbag and lock in a suitable manner
install the set for deactivation of Airbag
Note:
Activation of front passenger Airbag is indicated by the Airbag indicator light. After switching on the ignition, it must come on for about X s and then go off.
Created on: XX.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.
- exercise maximum caution for safety reason when repairing the Airbag systems
- never test the wiring harnesses with ignition on!!
- properly inform and instruct the vehicle owner about any deactivation or activation of the Airbag
- vehicles made up to Model Year XX/XXXX, it is necessary to use a set for deactivation of Airbag, Order No. XUX XXX XXX
connect with the control unit XX – Airbag
XX - Adaptation channel XX
enter value:
X = Airbag - front passenger - ON
X = Airbag - front passenger - OFF
Test
Save
check of error memory
switch ignition off for XXs
in case of deactivation disconnect the connecting block from the Airbag and lock in a suitable manner
install the set for deactivation of Airbag
XX - Adaptation channel XX
enter value:
X = Airbag - front passenger - side - ON
X = Airbag - front passenger - side - OFF
Test
Save
check of error memory
switch ignition off for XXs
in case of deactivation disconnect the connecting block from the Airbag and lock in a suitable manner
install the set for deactivation of Airbag
Note:
Activation of front passenger Airbag is indicated by the Airbag indicator light. After switching on the ignition, it must come on for about X s and then go off.
Created on: XX.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.