Škoda / Octavia (1U) / 19 - Gateway (J533 Gateway) CAN / Battery - replacement: adaptation II
Mark | Model | Control unit | Diagnostic operation |
---|
Mark
![Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.](/admin_assets/images/silk/comment.png)
Model
![Select a vehicle model or information group, for example Octavia III or Diesel, Petrol etc.](/admin_assets/images/silk/comment.png)
Control unit ![Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.](/admin_assets/images/silk/comment.png)
![Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.](/admin_assets/images/silk/comment.png)
Diagnostic operation ![Select the desired diagnostic procedure.](/admin_assets/images/silk/comment.png)
![Select the desired diagnostic procedure.](/admin_assets/images/silk/comment.png)
Diagnostic procedure
This operation was considered useful 2x.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Note:
- the feasibility of this test may depend on the equipment of the control unit
connect with the control unit XX - Gateway
XA - Adaptation II channel XX
enter value: CCC VVV SSSSSSSSSS
CCC = Battery - capacity
for instance XX Ah - enter as XXX
VVV = manufacturer
UMX = Akuma
VAX = Varta
BAX = Banner
MLA = Moll
TUX = Exide
JCB = JCI
XDO = Boading
SSSSSSSSSS = Battery - serial number BEM (see manufacturer’s label)
for instance serial number XXXXXXX - enter as XXXXXXXXXX
Test
Save
switch ignition off for XX s
- the feasibility of this test may depend on the equipment of the control unit
connect with the control unit XX - Gateway
XA - Adaptation II channel XX
enter value: CCC VVV SSSSSSSSSS
CCC = Battery - capacity
for instance XX Ah - enter as XXX
VVV = manufacturer
UMX = Akuma
VAX = Varta
BAX = Banner
MLA = Moll
TUX = Exide
JCB = JCI
XDO = Boading
SSSSSSSSSS = Battery - serial number BEM (see manufacturer’s label)
for instance serial number XXXXXXX - enter as XXXXXXXXXX
Test
Save
switch ignition off for XX s
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.