Škoda / Octavia II (1Z) / OTHER PROCEDURES / Setting of steering stoppers

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
- on-board voltage > XX V
- engine speed = idling
- first execute the function: ESP driving test, steering wheel turn angle sensor - Basic settings

XX - Adaptation channel XXX
enter value: XXX
Save

XX - Measured values group XXX

turn the steering wheel - straight direction

required values:
field X = -X.X° - +X.X° ± XX°

wait X s

turn the steering wheel - full way - left

wait X s

turn the steering wheel - full way - right side

wait X s

turn the steering wheel - straight direction

required values:
field X = -X.X° - +X.X° ± XX°

switch ignition off for: XXs

system indicator light: steering electronics = off

Created on: X.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in Buy