Škoda / Rapid (NH) / 17 - Dashboard KOMBI VDD RM09 [EV_Kombi_UDS_VDD_RM09] / Auxiliary heater: blokování - důvod

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in

connect with the control unit XX - auxiliary heater

Advanced Measured Values

select item in menu:

IDEXXXXX-IDEXXXXX - auxiliary heater: blocking - reason: residual fuel volume in tank
required value = residual fuel volume in tank OK

IDEXXXXX-IDEXXXXX - auxiliary heater: blocking - reason: the proportion of ethanol
required value = the proportion of ethanol OK

IDEXXXXX-MASXXXXX - auxiliary heater: blocking - reason: energy management -> disconnected
required value = inactive

IDEXXXXX-MASXXXXX - auxiliary heater: blocking - reason: energy management -> switch-off
required value = inactive

IDEXXXXX-MASXXXXX - auxiliary heater: blocking - reason: undervoltage detection
required value = inactive

IDEXXXXX-MASXXXXX - auxiliary heater: blocking - reason: Battery: Defect
required value = inactive

IDEXXXXX-MASXXXXX - auxiliary heater: blocking - reason: alternator: Defect
required value = inactive

IDEXXXXX-MASXXXXX - auxiliary heater: blocking - reason: palubní síť: overload
required value = inactive

IDEXXXXX - auxiliary heater: blocking - reason: Running time: Too high
required value = inactive

TIP: For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

End of test

Log-in