Diagnostic procedures for a VAG diagnostics
Database for coding vehicle control units Volkswagen - VAG
Software versions
VIN - Code validator
Škoda / Rapid (NH) / 09 - Central electrics BCM [EV_BCMA0 005001] / Automatic lights - Daytime running lights - settings
Search:
Search area:
| Mark | Model | Control unit | Diagnostic operation |
|---|
Mark 
Model
Control unit
Diagnostic operation
Diagnostic procedure
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Note:
- the feasibility of this test may depend on the equipment of the control unit
connect with the control unit XX - central electrics
XX - Security access
enter value: XXXXX
if it shall not be accepted, the unit does not require a safe approach
Start
XX - Adaptation
select item in menu: IDEXXXXX-ENGXXXXXX - Automatic lights - Daytime running lights
TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window
Read
enter value:
Automatic lights = Automatic lights - active
inactive = Automatic lights - inactive
Permanent running lights = Permanent running lights - active
Start
XX - Adaptation
select item in menu: IDEXXXXX-ENGXXXXXX - Automatic lights - BAP
TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window
Read
enter value:
active = Automatic lights - active
inactive = Automatic lights - inactive
Start
XX - Adaptation
select item in menu: IDEXXXXX-ENGXXXXXX - Automatic lights - factory settings BAP
TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window
Read
enter value:
active = Automatic lights - active
inactive = Automatic lights - inactive
Start
XX - Basic settings
select item in menu: zeroing learning values
Start
wait XXs
back
XX - end of communication
switch ignition off for XX s
- the feasibility of this test may depend on the equipment of the control unit
connect with the control unit XX - central electrics
XX - Security access
enter value: XXXXX
if it shall not be accepted, the unit does not require a safe approach
Start
XX - Adaptation
select item in menu: IDEXXXXX-ENGXXXXXX - Automatic lights - Daytime running lights
TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window
Read
enter value:
Automatic lights = Automatic lights - active
inactive = Automatic lights - inactive
Permanent running lights = Permanent running lights - active
Start
XX - Adaptation
select item in menu: IDEXXXXX-ENGXXXXXX - Automatic lights - BAP
TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window
Read
enter value:
active = Automatic lights - active
inactive = Automatic lights - inactive
Start
XX - Adaptation
select item in menu: IDEXXXXX-ENGXXXXXX - Automatic lights - factory settings BAP
TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window
Read
enter value:
active = Automatic lights - active
inactive = Automatic lights - inactive
Start
XX - Basic settings
select item in menu: zeroing learning values
Start
wait XXs
back
XX - end of communication
switch ignition off for XX s
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.