Škoda / Superb (3T) / 16 - Steering column electronics LENKS.MODUL [EV_VW360SteerWheelUDS A03004] / Cruise control Activation / Deactivation 01-engine

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 4x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
•         brake pedal, clutch pedal, cruise control device = released

Note:
•         the feasibility of this test may depend on the equipment of the control unit
•         This procedure may require the hood to be opened or the SFD protection to be unlocked

connect with the control unit XX - engine

XX - Coding

Coding calculator

byte X (the first byte in the sequence is counted as the zero byte):
bit X-X (the first bit in order is counted as the seventh, then down to zero)

TIP: In the coding calculator, use the drop-down menu or checkboxes to make your selection.

Manual Byte assembly in the coding calculator:

enter value (BIN):

xXXxxxxx = cruise control GRA /ACC - inactive
xxXxxxxx = cruise control GRA - active
xXxxxxxx = adaptive distance control ACC - active

After assembling the byte, press ENTER on the keyboard

Start

switch ignition off for XXs

continue ->

Note:
- the feasibility of this test may depend on the equipment of the control unit

connect with the control unit XX - Steering column electronics

XX - Coding

Coding calculator

byte X (the first byte in the sequence is counted as the zero byte)
bit X-X (the first bit in order is counted as the seventh, then down to zero)

TIP: In the coding calculator, use the drop-down menu or checkboxes to make your selection.

Manual Byte assembly in the coding calculator:

enter value (BIN):

xxxXxxxx = cruise control - inactive
xxxXxxxx = cruise control - active, controlled via: direction indicator light lever
xxXxxxxx = cruise control - active, controlled via: cruise control lever
xXxxxxxx = cruise control - active, controlled via: multifunctional steering wheel
XxXxxxxx = cruise control - active, controlled via: Adaptive Cruise Control (ACC)
XXxxxxxx = cruise control - active, controlled via: multifunctional steering wheel + Adaptive Cruise Control (ACC)

After assembling the byte, press ENTER on the keyboard

Start

switch ignition off for XXs

Log-in Buy