Škoda / Superb (3U) / 03 - brake electronics / Setting of brake fluid pressure sensor

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in

Conditions:
- number of faults = X
- brake pedal = released
- check component: brake fluid pressure sensor (XX - Measured values group XXX - required values: field X, field X = -X - X bar

connect with the control unit XX - Brake electronics

XX - Login
enter value: XXXXX

XX - Basic settings group XXX
Start

system indicator light: ABS - blinks

XX - end of communication

if values are not achieved, check part: brake fluid pressure sensor

Created on: XX.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in