VW / Golf/Jetta VII (AU) / A5 - Front Drive asssist sensor [EV_MFKBoschAU370 001001] / Lane assist - button - settings

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note:
- the feasibility of this test may depend on the equipment of the control unit!
- The control unit may require Login function for successfull coding For correct Login code go to Security access section of this unit.

connect with the control unit: AX - Front Sensor Driver

XX - Adaptation

select item in menu:

IDEXXXXX - adaptation - lane assist - terminal XX ON

TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

select item in menu:

active = lane assist - after engine Start = OFF
inactive = lane assist - after engine Start = ON
last setting = lane assist - after engine Start = last setting (memory)

Start

End of test

This procedure was generated by robot VISHunter XXXXXX XX.X.XXXX at XX:XX:XX on ACS-NTB

Log-in Buy