VW / Passat B6 (3C) / 09 - central electrics / adaptation

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

connect with the control unit XX - Central electrics

XX - Adaptation channel XX
enter value: XXXXX
Save

Coming Home - time

XX - Adaptation channel XX

enter value: time
entry possible after: Xs
scope = Xs - XXs
for instance XXs enter as XX

it must be activated in long coding

Test
Save

leaving-home - time

XX - Adaptation channel XX

enter value: time
entry possible after: Xs
scope = Xs - XXs
for instance XXs enter as XX
it must be activated in long coding

Test
Save

door mirror heating - time

XX - Adaptation channel XX

enter value: time
entry possible after: Xs
scope = Xs - XXX MIN
for instance XXXs enter as XXX

Test
Save

washers - Headlights - time

XX - Adaptation channel XX

enter value: time
entry possible after: Xs
scope = XXms - XXXXXms
for instance XXXs enter as XXX
it must be activated in long coding

Test
Save

illumination of leg room - intensity

XX - Adaptation channel XX

enter value: intensity
entry possible after: X%
scope = XX% - XXX %
for instance XX% enter as XX

Test
Save

load management

XX - Adaptation channel XX

enter value: time
entry possible after: X
scope = X - X
it must be activated in long coding

Test
Save

high beam - light assist

XX - Adaptation channel XX

enter value:
X = inactive
X = active

Test
Save

light assist

XX - Adaptation channel XX

enter value: time
entry possible after: XXms
scope = X - XXXXXms

Test
Save

Created on: X.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in Buy