VW / Passat B6 (3C) / 46 - comfort system - (KESSY / KSG; PQ46 / PQ47) / Adaptation of a new control unit to the vehicle - production mode - deactivation

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 1x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note:
- in some cases, it is necessary to adapt the newly purchased comfort control unit to the vehicle. A unit that is not adapted is manifest in complete malfunction of the central lock system

connect with the control unit XX - Comfort system

XX - Adaptation channel XXX

enter value:
X = production mode - deactivated
X = production mode - activated

Test
Save

switch ignition off for: XX s

after this operation, it is necessary to activate the function: Adaptation of the vehicle keys

Created on: XX.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in Buy