VW / Polo (AW) / 55 - Control of xenon headlight bevel [EV_HeadlRegulAUDIMXBAU64X 005014] / Operating variant - settings

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note:
- when driving in countries with LHD, the settings of the reflector must be changed to prevent bedazzlement of oncoming vehicles

connect with the control unit XX - Control of xenon headlight bevel

XX - Security access

enter value:
XXXXX = function accessible: Adaptation, Basic settings
(if it shall not be accepted, the unit does not require a safe approach)

Start

XX - Adaptation

select item in drop-down menu: IDEXXXXX - activation LHD / RHD

enter value:
active = LHD
inactive = RHD

Start

switch ignition off for XXs

Log-in Buy