VW / Polo (AW) / 09 - Central electrics [EV_BCMA0 208001] / Tail lights during use of the DRL (older) - activation

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 4x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note:
• This procedure may require the hood to be opened or the SFD protection to be unlocked
• Before any change, save the original values using Application > Channel Mapping and create a vehicle scan (Auto-Scan)

connect with the control unit XX - central electrics

XX - Security access
enter value: XXXXX = function accessible: adaptation
if it shall not be accepted, the unit does not require a safe approach (SFD)
Start

XX - Adaptation

select item in menu:
TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

ENGXXXXXX-ENGXXXXXX - lighting XXSL HLCX_C_XX
Save: Daytime running lights (driving lights)

ENGXXXXXX-ENGXXXXXX- lighting XXSL HRAXX_CDXX
Save: XX

switch ignition off for XX s

Log-in Buy