VW / Sharan (7M) / OTHER PROCEDURES / Adaptation of remote control devices

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 3x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
- windows = closed
- the adaptation of each ignition key must not take more than XX seconds

X)
insert the key into the door lock and turn it three times forward (unlock direction). For X seconds, you must hold the key each time for X second in the unlock direction

X)
remove the key from the lock, press the lock button on the key and hold

X)
press the unlock button three times and then release the lock button

for control of this procedure the LED diode in the key blinks five times. The indicator light in the door trim by blinking five times announces the identification of the initial code of the control unit

Note:
- the adaptation of additional keys must be done at the latest within XX seconds after Start of the blinking of the warning indicator light in the door, repeat points X and X

Created on: X.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in Buy