VW / Sharan (7N) / 03 - brake electronics TRW 450M C3 (J104 C3 450M) / brake assist - adaptation

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
- on-board voltage > XX.X V
- PR code (PR codes are contained in the service booklet, or on the label near the reserve wheel)

connect with the control unit XX - Brake electronics

Note:
- this is intervention in the safety system of the vehicle and it is not recommended to change the factory settings!

XX - Security access

enter value: XXXXX

Start

XX - Adaptation channel XX

enter value:
X = PR code: DXX
X = PR code: DXL, DEX, DXX, DXX, DXX, DXX, DEX, DXX(software version XXXX+)

Test

Save

switch ignition off for XX s

Log-in Buy