VW / Sharan (7N) / 09 - central electrics (BCM PQ35) CAN / remote control - Test

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 1x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
- ignition = OFF
- remove the ignition key

connect with the control unit XX - Central electrics

XX - Measured values group XXX

press an arbitrary button on the controller

observe values:
field X = X - X (key)

field X = key button
Xxxxxx = open
xXxxxx = closed
xxXxxx = tailgate
xxxxxX = panic

field X = X - X (total number of keys)

if values are not achieved - check component
remote control - battery
remote control - of generation
control unit - XX - Central electrics

Log-in Buy