VW / Sharan (7N) / 15 – Airbag (VW10 - 012/013/ 020/021/022/033/035/037/302) CAN / Activation / Deactivation of Airbag

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 1x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in

Warning:
- exercise maximum caution for safety reason when repairing the Airbag systems
- never test the wiring harnesses with ignition on!!
- properly inform and instruct the vehicle owner about any deactivation or activation of the Airbag

Note:
Activation of front passenger Airbag is indicated by the Airbag indicator light. After switching on the ignition, it must come on for about X s and then go off.

connect with the control unit XX – Airbag

Airbag - front passenger

XX - Adaptation channel XX
enter value:
X = Airbag - front passenger - ON
X = Airbag - front passenger - OFF
Test
Save

check of error memory
switch ignition off for XXs

Airbag - driver

XX - Adaptation channel XX
enter value:
X = Airbag - driver - side - ON
X = Airbag - driver - side - OFF
Test
Save

check of error memory
switch ignition off for XXs

Airbag - front passenger - side

XX - Adaptation channel XX
enter value:
X = Airbag - front passenger - side - ON
X = Airbag - front passenger - side - OFF
Test
Save

check of error memory
switch ignition off for XXs

Airbag - driver - side

XX - Adaptation channel XX
enter value:
X = Airbag - driver - side - side - ON
X = Airbag - driver - side - side - OFF
Test
Save

check of error memory
switch ignition off for XXs

safety Seat belt tensioning - front passenger

XX - Adaptation channel XX
enter value:
X = safety Seat belt tensioning - front passenger- ON
X = safety Seat belt tensioning - front passenger - OFF
Test
Save

check of error memory
switch ignition off for XXs

safety Seat belt tensioning - driver

XX - Adaptation channel XX
enter value:
X = safety Seat belt tensioning- driver - ON
X = safety Seat belt tensioning - driver - OFF
Test
Save

check of error memory
switch ignition off for XXs

head Airbag - front passenger

XX - Adaptation channel XX
enter value:
X = head Airbag - front passenger - ON
X = head Airbag - front passenger - OFF
Test
Save

check of error memory
switch ignition off for XXs

head Airbag - driver

XX - Adaptation channel XX
enter value:
X = head Airbag - driver - ON
X = head Airbag - driver - OFF
Test
Save

check of error memory
switch ignition off for XXs

Created on: X.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in