Diagnostic procedures for a VAG diagnostics
Database for coding vehicle control units Volkswagen - VAG
Software versions
VIN - Code validator- Scan Explorer
VW / Taigo (CS) 2022 / 09 - Central electrics [EV_BCMA0 207001] / Tail lights during use of the DRL (brake lights tail lights) - deactivation
Search:
Search area:
| Mark | Model | Control unit | Diagnostic operation |
|---|
Mark 
Model
Control unit
Diagnostic operation
Diagnostic procedure
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Note:
• the feasibility of this test may depend on the equipment of the control unit
• This procedure may require the hood to be opened or the SFD protection to be unlocked, SFDX
• Before any change, save the original values using Application > Channel Mapping and create a vehicle scan (Auto-Scan)
connect with the control unit XX - central electrics
XX - Security access
enter value: XXXXX
if it shall not be accepted, the unit does not require a safe approach (SFD/SFDX)
Start
XX - Adaptation
select item in menu:
TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window
brake lights - left
ENGXXXXXX-ENGXXXXXX-LeuchteXXBR LAXX-Light_Function_E_XX
Save: inactive
ENGXXXXXX-ENGXXXXXX-LeuchteXXBR LAXX-Dimming_EF_XX
Save: X
brake lights - right side
ENGXXXXXX-ENGXXXXXX-LeuchteXXBR RCX-Light_Function_E_XX
Save: inactive
ENGXXXXXX-ENGXXXXXX-LeuchteXXBR RCX-Dimming_EF_XX
Save: X
tail lights - left
ENGXXXXXX-ENGXXXXXX-LeuchteXXSL HLCX-Light_Function_C_XX
Save: inactive
ENGXXXXXX-ENGXXXXXX-LeuchteXXSL HLCX-Dimming_CD_XX
Save: X
tail lights - right side
ENGXXXXXX-ENGXXXXXX-LeuchteXXSL HRAXX-Light_Function_C_XX
Save: inactive
ENGXXXXXX-ENGXXXXXX-LeuchteXXSL HRAXX-Dimming_CD_XX
Save: X
switch ignition off for XX s
• the feasibility of this test may depend on the equipment of the control unit
• This procedure may require the hood to be opened or the SFD protection to be unlocked, SFDX
• Before any change, save the original values using Application > Channel Mapping and create a vehicle scan (Auto-Scan)
connect with the control unit XX - central electrics
XX - Security access
enter value: XXXXX
if it shall not be accepted, the unit does not require a safe approach (SFD/SFDX)
Start
XX - Adaptation
select item in menu:
TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window
brake lights - left
ENGXXXXXX-ENGXXXXXX-LeuchteXXBR LAXX-Light_Function_E_XX
Save: inactive
ENGXXXXXX-ENGXXXXXX-LeuchteXXBR LAXX-Dimming_EF_XX
Save: X
brake lights - right side
ENGXXXXXX-ENGXXXXXX-LeuchteXXBR RCX-Light_Function_E_XX
Save: inactive
ENGXXXXXX-ENGXXXXXX-LeuchteXXBR RCX-Dimming_EF_XX
Save: X
tail lights - left
ENGXXXXXX-ENGXXXXXX-LeuchteXXSL HLCX-Light_Function_C_XX
Save: inactive
ENGXXXXXX-ENGXXXXXX-LeuchteXXSL HLCX-Dimming_CD_XX
Save: X
tail lights - right side
ENGXXXXXX-ENGXXXXXX-LeuchteXXSL HRAXX-Light_Function_C_XX
Save: inactive
ENGXXXXXX-ENGXXXXXX-LeuchteXXSL HRAXX-Dimming_CD_XX
Save: X
switch ignition off for XX s
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
