VW / Touareg (7P) / 03 - Brake electronics [EV_MK25AXT 007001] / Basic settings: closing valves (diverter valves)

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note:
•         done after replacement of component: control unit ABS JXXX
•         first execute the function: Inlet valve - basic settings

Conditions:
•         ambient temperature = XX°C - XX°C
•         control unit ABS JXXX - coding = OK
•         engine speed = idling

connect with the control unit XX - brake electronics

XX - Security access

enter value: XXXXX

Start

XX - Basic settings

select item in drop-down menu: IDEXXXXX-ENGXXXXX- basic settings: Inlet valve / separation valves
Input the parameter: separation valves (Closing valve)

Start

wait = XXs

desired condition: Successfully completed

Stop

End of test

Log-in Buy