VW / Touareg (7P) / 34 - Clearance height control PASM [EV_PASMConti 001004] / Shock absorber - filling

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
- Workshop jack mode = active
- lift the vehicle on a jack
- Nitrogen filling system VAS XXXXA + reduction TXXXX

Warning
The vehicle may be set to a different position during this operation !!!

connect with the control unit XX - clearance height control

LF Shock absorber - filling:

Conditions:
- LF Shock absorber - Emptied
- Nitrogen filling system VAS XXXXA + reduction TXXXX - connect

XX - Security access

enter value: XXXXX

Start

XX - Basic settings

select item in drop-down menu: IDEXXXXX - Check system air volume

Start

required value: Successfully completed

XX - Basic settings

select item in drop-down menu: MASXXXXX-MASXXXXX - functions filling

In the parameter menu, select: in front left
In the parameter menu, select: completely

Start

required value: Successfully completed

Nitrogen filling system VAS XXXXA + reduction TXXXX - disconnect

RF Shock absorber - filling:

Conditions:
- RF Shock absorber - Emptied
- Nitrogen filling system VAS XXXXA + reduction TXXXX - connect

XX - Security access

enter value: XXXXX

Start

XX - Basic settings

select item in drop-down menu: IDEXXXXX - Check system air volume

Start

required value: Successfully completed

XX - Basic settings

select item in drop-down menu: MASXXXXX-MASXXXXX - functions filling

In the parameter menu, select: in front right side
In the parameter menu, select: completely

Start

required value: Successfully completed

Nitrogen filling system VAS XXXXA + reduction TXXXX - disconnect

LR Shock absorber - filling:

Conditions:
- LR Shock absorber - Emptied
- Nitrogen filling system VAS XXXXA + reduction TXXXX - connect

XX - Security access

enter value: XXXXX

Start

XX - Basic settings

select item in drop-down menu: IDEXXXXX - Check system air volume

Start

required value: Successfully completed

XX - Basic settings

select item in drop-down menu: MASXXXXX-MASXXXXX - functions filling

In the parameter menu, select: in rear left
In the parameter menu, select: completely

Start

required value: Successfully completed

Nitrogen filling system VAS XXXXA + reduction TXXXX - disconnect

RR Shock absorber - filling:

Conditions:
- RR Shock absorber - Emptied
- Nitrogen filling system VAS XXXXA + reduction TXXXX - connect

XX - Security access

enter value: XXXXX

Start

XX - Basic settings

select item in drop-down menu: IDEXXXXX - Check system air volume

Start

required value: Successfully completed

XX - Basic settings

select item in drop-down menu: MASXXXXX-MASXXXXX - functions filling

In the parameter menu, select: in rear right side
In the parameter menu, select: completely

Start

required value: Successfully completed

Nitrogen filling system VAS XXXXA + reduction TXXXX - disconnect

Log-in Buy