VW / Touareg (7P) / 03 - Brake electronics MK100 IPB ESC [EV_Brake1UDSContiMK100IPB 037009] / Check of the confusion of the hydraulic outlets

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note:
This function is used to check the correctness of the connection of the hydraulic lines to the individual wheels

Conditions:
- on-board voltage > XX V
- second mechanic necessary

connect with the control unit XX - brake electronics

XX - Basic settings

LF wheel

depress and hold brake pedal

desired condition: LF + RF + LR + RR wheel = blocked

select item in menu: IDEXXXXX-ENGXXXXXX - Check of the confusion of the hydraulic outlets

Phase = XX - LF wheel

activate default settings

desired condition:
- LF wheel = released
- RF + LR + RR wheel = blocked

If it is possible to turn any wheel, there is a probable defect in the mechanical or hydraulic part of the brakes

release brake pedal

desired condition: LF + RF + LR + RR wheel = released

RF wheel

depress and hold brake pedal

desired condition: LF + RF + LR + RR wheel = blocked

select item in menu: IDEXXXXX-ENGXXXXXX - Check of the confusion of the hydraulic outlets

Phase = XX - RF wheel

activate default settings

desired condition:
- RF wheel = released
- LF + LR + RR wheel = blocked

If it is possible to turn any wheel, there is a probable defect in the mechanical or hydraulic part of the brakes

release brake pedal

desired condition: LF + RF + LR + RR wheel = released

LR wheel

depress and hold brake pedal

desired condition: LF + RF + LR + RR wheel = blocked

select item in menu: IDEXXXXX-ENGXXXXXX - Check of the confusion of the hydraulic outlets

Phase = XX - LR wheel

activate default settings

desired condition:
- LR wheel = released
- RF + LF + RR wheel = blocked

If it is possible to turn any wheel, there is a probable defect in the mechanical or hydraulic part of the brakes

release brake pedal

desired condition: LF + RF + LR + RR wheel = released

RR wheel

depress and hold brake pedal

desired condition: LF + RF + LR + RR wheel = blocked

select item in menu: IDEXXXXX-ENGXXXXXX - Check of the confusion of the hydraulic outlets

Phase = XX - RR wheel

activate default settings

desired condition:
- RR wheel = released
- RF + LF + LR wheel = blocked

If it is possible to turn any wheel, there is a probable defect in the mechanical or hydraulic part of the brakes

release brake pedal

desired condition: LF + RF + LR + RR wheel = released

Circuit X

depress and hold brake pedal

desired condition: LF + RF + LR + RR wheel = blocked

select item in menu: IDEXXXXX-ENGXXXXXX - Check of the confusion of the hydraulic outlets

Phase = XX - Circuit X

activate default settings

desired condition:
- LF + RR wheel = released
- RF + LR wheel = blocked

If it is possible to turn any wheel, there is a probable defect in the mechanical or hydraulic part of the brakes

release brake pedal

desired condition: LF + RF + LR + RR wheel = released

Circuit X

depress and hold brake pedal

desired condition: LF + RF + LR + RR wheel = blocked

select item in menu: IDEXXXXX-ENGXXXXXX - Check of the confusion of the hydraulic outlets

Phase = XX - Circuit X

activate default settings

desired condition:
- RF + LR wheel = released
- LF + RR wheel = blocked

If it is possible to turn any wheel, there is a probable defect in the mechanical or hydraulic part of the brakes

release brake pedal

desired condition: LF + RF + LR + RR wheel = released

Log-in Buy