VW / Touran (1T) / 17 - dashboard -> 10/08 (KOMBIINSTRUMENT VD1/VDD) CAN / reset of service intervals - fixed service interval

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 2x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

distance to: oil change

XX - Adaptation channel XX
enter value: distance to: oil change
entered in hundreds (for instance: XX.XXXkm enter as XXXXX)
Test
Save

Note:
- some older dashboards require input of value in thousands of km, e.g. XXXXX is entered as XXXXX

distance to: service inspection

XX - Adaptation channel XX
enter value: distance to: service inspection
entered in hundreds (for instance: XX.XXXkm enter as XXXXX)
Test
Save

Note:
- some older dashboards require input of value in thousands of km, e.g. XXXXX is entered as XXXXX

time to: service inspection

XX - Adaptation channel XX
enter value: time to: service inspection
entry possible after: X day (for instance: XXX days enter as XXXXX)
Test
Save

Created on: X.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in Buy