VW / Transporter (7H-7J) / 09 - central electrics (BCM PQ25) CAN / Adaptation of remote control devices

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 8x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
- number of faults = X
- ignition = ON

Note:
- it is necessary to adapt all keys (even why they are already functional)

also read the procedure: Adaptation of remote control devices variant X

connect with the control unit XX - central electrics

XX - Adaptation channel XX
enter value: XXX
Test
Save

XX - Adaptation channel XX
enter value: total number of keys
for instance X enter as X
Test
Save

within X s after saving the value, gradually press the LOCK button on all remote control devices.

check of error memory

Note:
- MAX. number of keys = X

Created on: XX.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in Buy