VW / Transporter 98-03 (7D) / 03 - Brake electronics Bosch 5.3 ESP / coding

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note
- Coding can be done only after Login using a specific password
- After successful coding, it is necessary to do basic setting of the steering angle sensor
- It is possible that it shall be necessary to enter a non-zero WSC It is possible to enter anything, For example. XXXXX.

XX - Login

XXXXX = function accessible: coding
XXXXX = function accessible: coding (American market - (PR-XPX/XLB))

Start

XX - Coding

XXXXX = Diesel
XXXXX = American market - (PR-XPX/XLB)

Start

Created on: XX.X.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in Buy