VW / Transporter 98-03 (7D) / dashboard / Adaptation without CAN-Bus

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

connect with the control unit XX - Dashboard

service interval - reset

XX - Adaptation channel XX

enter value:
XX = service interval - reset
XX = service interval OIL - active
XX = service interval INSP - active
XX = service interval OIL, INSP - active

Test
Save

correction of the instantaneous consumption counter

XX - Adaptation channel XX

enter value: correction of the instantaneous consumption counter

entry possible after X%
scope = XX% - XXX%
basic value = XXX%
for instance = XX% enter as XX

Test
Save

Language settings

XX - Adaptation channel XX

enter value:
XX - german
XX - English
XX - French
XX - Italian
XX - Spanish
XX - Portuguese
XX - Czech

Test
Save

kilometres travelled

XX - Login
enter value: XXXXX

XX - Adaptation channel XX
enter value: kilometres travelled
entered in tens km (for instance: XX XXXkm enter as XXXX)
Test
Save

Note:
setting can be done only once and up to a travel distance of XXXkm

distance to: oil change

XX - Adaptation channel XX
enter value: distance to: oil change
entered in thousands (for instance: XX.XXXkm enter as XXXXX)
Test
Save

Note:
- some older dashboards require input of value in hundreds of km, e.g. XXXXX is entered as XXXXX

distance to: service inspection

XX - Adaptation channel XX
enter value: distance to: service inspection
entered in thousands (for instance: XX.XXXkm enter as XXXXX)
Test
Save

Note:
- some older dashboards require input of value in hundreds of km, e.g. XXXXX is entered as XXXXX

time to: service inspection

XX - Adaptation channel XX
enter value: time to: service inspection
entry possible after: XX days (for instance: XXX days enter as XXXXX)
Test
Save

correction of the fuel level indicator

XX - Adaptation channel XX
enter value:
XXX - XXX
basic value = XXX
for instance: XXX enter as XXXXX
Test
Save

Created on: X.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in Buy