VW / Up (AA) / 15 – Airbag VW10 (VW10Airbag008) UDS / Driver’s Airbag - adaptation

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 1x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Warning:
- exercise maximum caution for safety reason when repairing the Airbag systems
- never test the wiring harnesses with ignition on!!
- properly inform and instruct the vehicle owner about any deactivation or activation of the Airbag

Note:
Activation of front passenger Airbag is indicated by the Airbag indicator light. After switching on the ignition, it must come on for about X s and then go off.

connect with the control unit XX – Airbag

XX - Adaptation UDS

select item in drop-down menu:

MASXXXXX-MASXXXXX - Driver’s Airbag - Adaptation (UDS code XXXXX)

enter value:

activated: Driver’s Airbag = active
deactivation: Driver’s Airbag = inactive

Start

switch ignition off for XXs

Created on: X.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in Buy