Diagnostic procedures for a VAG diagnostics
Database for coding vehicle control units Volkswagen - VAG
Software versions
VIN - Code validator
VW / VW LT from 96 (2D) / dashboard / adaptation
Search:
Search area:
| Mark | Model | Control unit | Diagnostic operation |
|---|
Mark 
Model
Control unit
Diagnostic operation
Diagnostic procedure
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Note:
- adaptation is possible depending on the equipment
connect with the control unit XX - Dashboard
reset of service intervals
XX - Adaptation channel XX
enter value:
XX = reset of service intervals
XX = service interval - OIL - active
XX = service interval - INSP - active
XX = service interval - INSP, OIL - active
Test
Save
correction of the instantaneous consumption counter
XX - Adaptation channel XX
enter value: correction of the instantaneous consumption counter
entry possible after X%
scope = XX% - XXX%
basic value = XXX%
for instance = XX% enter as XX
Test
Save
Language settings
XX - Adaptation channel XX
enter value:
XX - german
XX - English
XX - French
XX - Italian
XX - Spanish
XX - Portuguese
XX - Czech
Test
Save
kilometres travelled
XX - Login
enter value: XXXXX
XX - Adaptation channel XX
enter value: kilometres travelled
entered in tens km (for instance: XX XXXkm enter as XXXX)
Test
Save
Note:
setting can be done only once and up to a travel distance of XXXkm
distance to: oil change
XX - Adaptation channel XX
enter value: distance to: oil change
entered in thousands (for instance: XX.XXXkm enter as XXXXX)
Test
Save
distance to: service inspection
XX - Adaptation channel XX
enter value: distance to: service inspection
entered in thousands (for instance: XX.XXXkm enter as XXXXX)
Test
Save
time to: service inspection
XX - Adaptation channel XX
enter value: time to: service inspection
entry possible after: XX days (for instance: XXX days enter as XXXXX)
Test
Save
correction of the fuel level indicator
XX - Adaptation channel XX
enter value: correction of the fuel level indicator
entry possible after X%
scope = XXX% - XXX%
basic value = XXX%
for instance = XXX% enter as XXX
Test
Save
Created on: X.XX.XXXX X:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.
- adaptation is possible depending on the equipment
connect with the control unit XX - Dashboard
reset of service intervals
XX - Adaptation channel XX
enter value:
XX = reset of service intervals
XX = service interval - OIL - active
XX = service interval - INSP - active
XX = service interval - INSP, OIL - active
Test
Save
correction of the instantaneous consumption counter
XX - Adaptation channel XX
enter value: correction of the instantaneous consumption counter
entry possible after X%
scope = XX% - XXX%
basic value = XXX%
for instance = XX% enter as XX
Test
Save
Language settings
XX - Adaptation channel XX
enter value:
XX - german
XX - English
XX - French
XX - Italian
XX - Spanish
XX - Portuguese
XX - Czech
Test
Save
kilometres travelled
XX - Login
enter value: XXXXX
XX - Adaptation channel XX
enter value: kilometres travelled
entered in tens km (for instance: XX XXXkm enter as XXXX)
Test
Save
Note:
setting can be done only once and up to a travel distance of XXXkm
distance to: oil change
XX - Adaptation channel XX
enter value: distance to: oil change
entered in thousands (for instance: XX.XXXkm enter as XXXXX)
Test
Save
distance to: service inspection
XX - Adaptation channel XX
enter value: distance to: service inspection
entered in thousands (for instance: XX.XXXkm enter as XXXXX)
Test
Save
time to: service inspection
XX - Adaptation channel XX
enter value: time to: service inspection
entry possible after: XX days (for instance: XXX days enter as XXXXX)
Test
Save
correction of the fuel level indicator
XX - Adaptation channel XX
enter value: correction of the fuel level indicator
entry possible after X%
scope = XXX% - XXX%
basic value = XXX%
for instance = XXX% enter as XXX
Test
Save
Created on: X.XX.XXXX X:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.